The conversion set contains the ready assembled Triabolo head, swashplate and rotorblade set and 110mm tailblades. This option is only available for Diabolo owners.
The kit includes NHP 680mm main blades and NHP 110mm tail blades.
Additional main blade sets can be ordered using part number 1033 and tail blades use 1038
The Triabolo was engineered and tested to be flown using ONLY the NHP blades supplied with each kit along with the plastic blade spacers. The blades are a lighter style blade weighing around 160 grams and with the correct stiffness allowing the correct dampening required in the head. The NHP blades were design specifically for the Triabolo. Head speed should NEVER exceed 1800 rpm. WITH THE ADDITIONAL 3RD BLADE THE MAXIUM PITCH SHOULD BE KEEPED BELOW 10.5 DEGREEES. THIS SETTING IS COMPARABLE TO 13 DEGREES ON A 2 BLADED HEAD.